4 Апреля 2017
Printed electronics can lead to both low-cost and flexible devices. Flexible electronics is of particular interest for wearable systems, such as health and fitness trackers, while the relative low-costs of printing are attractive for functional packaging for consumer products. Graphene and related layered materials (GRMs) are ideal for printed electronics because they can be readily solution processed into inks that have excellent electronic properties.
Ink-jet printable and biocompatible layered electronics
Now, biocompatible, water-based inks containing GRMs have been developed as building blocks for ink-jet printable electronic devices. Importantly, the inks can be used to successfully ink-jet print electronic devices based on combinations of different layered materials. The research, published in Nature Nanotechnology, was performed in a collaboration between researchers at the University of Manchester, UK and the University of Pisa, Italy.
Ink-jet printing The GRM inks containing conductive graphene, the insulator hexagonal boron nitride (hBN) and semiconductor transition metal dichalcogenides (TMDs), such as MoS2 and WS2, provide the full range of electronic properties needed to print complex electronics, including photodetectors. The inks can be printed onto flexible and stiff substrates, such as paper, glass and plastic, and the inks' biocompatibility also suggests possibilities for printing biomedical devices such as sensor implants.
Ink-jet printing is attractive as a fast and accessible route to printed electronics, because of simple switching of design and materials. The devices were produced using a material ink-jet printer available in the market, demonstrating the suitability of this technique as a platform for rapid prototyping (similar to 3D printing), while paving the way towards print-on-demand electronics.
Gianluca Fiori, a researcher at the department of Information Engineering at the University of Pisa, Italy, said "We are now entering a new scenario in the field of electronics, where electronic systems can be printed on demand and on flexible substrates as paper. GRMs based inks could indeed represent an enabling technology for the fast-growing market of flexible and portable electronics."
Printed memory The inks were used to print photodetectors and the first ink-jet printable read-only memory, in the form of an array of bit-strips using graphene and WS2 inks. Such readable memory could be ideal for identification numbers in radio-frequency identification (RFID) tags, and could be developed further into more complex memory systems when integrated with other printed devices such as diodes and transistors.
Heterostructures, made of stacked layers of different materials, are important for compact integration of functional circuits. Typically, with ink-jet printing it is very difficult to obtain good interfaces, meaning the printed devices do not operate reliably. For these new inks, the researchers optimised the ink formula specifically for ink-jet printing, adding xantham gum as a binder to prevent the printed interfaces merging together.
The research was led by Cinzia Casiraghi, a researcher in the School of Chemistry at the University of Manchester, UK. She explained that the printable heterostructures are "the first step towards the realization of low-cost and flexible devices." Outlining the challenges that this research overcomes, she said "Currently, heterostructures are formed by two or three layers and only very few examples of more complex heterostructures have been demonstrated, using non-scalable techniques. We are now in the position to fabricate devices of arbitrary geometry on a flexible substrate. For example, we can produce arrays of heterostructures, where every junction can be designed ad hoc to store or sense a particular type of information."
A printed future One important area where these printed circuits could find application is in smart packaging. The Internet of Things is enabling connectivity in an unprecedented range of applications, and smart packaging could be ideal for managing inventories and monitoring spoilage in food, drinks and pharmaceuticals; applications for which the ink's biocompatibility is essential. "We are also very excited about the possibility of implementing logic circuits made of these materials - indeed, we are further developing these type of devices," added Casiraghi. Coşkun Kocabaş, a researcher at Bilkent University, Turkey, is Deputy Leader of the Partnering Division of the Graphene Flagship, where Casiraghi's ERC project NOC2D is affiliated. "This method provides the advantage of heterogeneous integration of conducting, semiconducting and dielectric layered materials. This capability will enable new directions in electronics aiming to generate very large scale and low cost circuits," he said. "Another exciting next step would be integration of this method with 3D printing techniques which could enable printed circuits with exotic topologies."
Andrea Ferrari, Science and Technology Officer and Chair of the Management Panel of the Graphene Flagship added "Printed and flexible electronics has been at the core of the Graphene Flagship since its beginning and is certainly one of the key areas where graphene and related materials can find near-term applications. This work is an important step forward, and demonstrates the successful collaboration of between the Flagship Core 1 Partners and the newly formed partnering division, further strengthening the Flagship as the European hub for innovation in graphene and related materials."
Source and top image: Graphene Flagship